Built for a hot, dry valley
Concord sits in a warm inland valley at the foot of Mount Diablo, cut off from most of the cooling fog that reaches places closer to the bay. Summer days often run well into the 90s, and heat waves push past 100. Rain comes almost entirely between November and March, so a deck may go months without a drop and then soak for weeks.
That cycle is hard on concrete. The local soil is largely adobe clay, which swells when the winter rains arrive and shrinks and cracks open in late summer. Decks that rest on it move a little every year. Many of the pools in neighborhoods off Ygnacio Valley Road, Clayton Road and Treat Boulevard date from the 1960s and 70s, and their decks show it with long cracks, faded cool deck and crumbling edges.
Lower surface temperatures
The single biggest comfort upgrade is color. A pale coating reflects much more of the sun than bare gray concrete or a dark stain, which keeps the surface noticeably cooler. A knockdown texture helps too, because the flattened peaks touch less of your foot than a smooth slab. We recommend sand, pale gray, buff or off-white tones for any deck that gets full afternoon sun.
Pairing a coating with a pool remodel
A lot of our Concord pool deck work happens alongside a replaster or retile. If you are planning a remodel, sequencing matters:
- New coping and tile go in first.
- We prep and coat the deck while the pool is still empty, with no risk of dust in fresh water.
- The plaster crew finishes the interior last, then the pool is filled.
Doing it in that order keeps the coping-to-deck joint clean and avoids scuffing new plaster. We are happy to coordinate dates with your pool builder.
How we resurface
We start by grinding off failing cool deck, paint and sealer until we reach firm concrete. Cracks are routed and filled, and any that have shifted are evaluated so you know whether the cause is soil movement, a broken drain line or a slab that needs to be cut and replaced. Next comes a bonding primer, then a sprayed texture troweled flat to a comfortable finish, followed by color coats and a clear sealer. The expansion joint at the coping is finished with flexible sealant so the deck and pool can move independently.
Permits, HOAs and water
Coating an existing deck within Concord city limits is cosmetic work and normally does not need a building permit. Moving drains, adding slab or changing the pool itself can, and your pool contractor should handle those. Some Concord neighborhoods have HOA rules on visible finishes, and we can supply color samples and product sheets for approval.
In drought years, we keep water use low. Most of our cleaning is done with targeted pressure washing and a vacuum rather than long runs of the hose.
Upkeep
Sweep off oak leaves and dust, rinse lightly, and keep pool chemicals off the surface. Reseal every few years to keep the color bright and the texture protected from UV.
Need help inside the house too? We also do metallic epoxy flooring and polished concrete.
Patios and walkways next to the pool
Many Concord backyards have concrete that runs from the pool to a patio, a side yard and the driveway gate. Coating only the pool deck can leave the rest looking tired. We can extend the same finish across connected areas, or use a complementary color for the patio so the spaces feel related but distinct. Walkways to the side gate get extra grit since they are often in shade and stay damp in winter.
FAQs
Can you coat over travertine or pavers?
No. Our systems are made for concrete. We can coat concrete deck areas next to stone.
How long until we can use the deck?
Light foot traffic the next day, furniture after about two days.
Which areas do you cover?
Concord, Clayton, Pleasant Hill, Walnut Creek, Martinez and Pittsburg.
Plan your pool deck project
Call (925) 414-8786. We will look at the deck, talk through colors and timing, and send a clear written quote.